The 3TREES Healthy Home Odorless 5-in-1 Wall Paint uses superior emulsion as its aggregate and can provide an odorless home environment for you. At the same time, it has the five major functions of hairline crack covering, scrub resistance, alkali resistance, doubled anti-fungus performance and lasting wall colors, can provide comprehensive protection to make your walls look new as ever and create a healthy and beautiful home environment.

Super Healthy, Super Caring

UL GREENGUARD Gold Certification

French Indoor Air Emissions A+ Certification

China Environmental Labelling Product Certification

Five Functions, Solve A Variety of Common Wall Hazards

•  hairline crack covering

• scrub resistance

• alkali resistance

• doubled anti-fungus performance

• lasting wall colors

Application instructions: The surface must be clean, dry, neutral, flat, and free of floating ash, oil stains, and foreign substances. Water-leaking positions must undergo waterproof treatment. Before coating, the surface should be polished and leveled to ensure that the surface humidity of the pre-coated substrate is less than 10% and the pH value is less than 10. Paint surface effect will depend on substrate flatness.

Application conditions: Wall temperature ≥ 5°C, humidity ≤ 85%, well-ventilated.

Application method: Brushing, rolling, or spraying.

Dilution ratio: Dilute with an appropriate amount of clean water (until reaching the appropriate application viscosity).

Theoretical paint consumption: 12–14 m²/L/round (paint film is calculated as 30 μm, and actual consumption varies slightly with substrate roughness and porosity).

Recoating time: Surface drying for 30–60 minutes, hard drying for 2 hours, recoating at an interval of 2–3 hours (which may be duly extended under low-temperature and high-humidity conditions).

Maintenance time: 7 days/25°C, which may be duly extended under low-temperature and high-humidity conditions to obtain solid paint film. In the process of paint film maintenance and daily use, it is suggested that doors and windows should be closed for dehumidification in high humidity weather (such as Wet Spring and Plum Rain).

Substrate treatment:

1. New wall: Thoroughly remove surface dust, oil stains, loose plaster, etc., and repair any holes to ensure that the wall surface is clean, dry and smooth.

2. Re-painting wall: Thoroughly remove the original paint film and putty layer, clean surface dust, and level, polish, clean and thoroughly dry the surface, so as to avoid problems left over from the old wall (odor, mildew, etc.) affecting the application effect.

*Before coating, the substrate should be checked; coating can only start after the substrate passes acceptance inspection.

Coating system:

For best effect, please use this product together with 3TREES one-stop wall decoration solutions.

底材处理（三棵树系列基层处理产品）——底漆（三棵树净味系列底漆）一遍——面漆（康家净味金装五合一墙面漆）二遍

Substrate treatment (3TREES substrate treatment product series) — primer (3TREES odorless primer series, one round) — topcoat (Healthy Home Odorless 5-in-1 Wall Paint, two rounds)

Tool cleaning:

After or between applications, please clean the tools with clean water in time to prolong the service life of tools.

The packaging bucket can be recycled after cleaning, and packaging waste may be recycled for reuse.