The product has a strong anti-fungus function and can effectively resist mold breeding. Meanwhile, it also has the advantages of strong alkali resistance, good sealing performance, strong permeability and convenient application and can play multiple roles, including substrate sealing, wall surface reinforcement and topcoat adhesion, and reduce such common wall problems as mildew spots, peeling-off, alkali formation and yellowing.

Odorless, the product is free from added formaldehyde and benzene substances and easy to apply. With its big coating area and good compatibility with topcoat, it can help save the amount of topcoat and enable you to easily create a clean and bright home environment.

Main ingredients: Water, pigment, filler, emulsion and auxiliaries.

Product Use: It is widely used in the interior wall decoration and protection of villas, hotels, hospitals, schools, office buildings and homes.

Super Healthy, Super Caring

China Environmental Labelling Product Certification

Odorless

No additives

Practical Functions, In-Depth Protection

Strong resistance to fungus

Strong resistance to alkali

Odorless and environmental-friendly

Good permeability

Excellent sealing performance

Easier application

No additives: Free from added formaldehyde and benzene substances (benzene, toluene, ethylbenzene, and xylene)

Application instructions: The surface must be clean, dry, neutral, flat, and free of floating ash, oil stains and foreign substances. Water-leaking positions must undergo waterproof treatment. Before coating, the surface should be polished and leveled to ensure that the surface humidity of the pre-coated substrate is <10% and the pH value is <10.

Application conditions: Wall temperature ≥ 5 ℃, humidity ≤ 85%, well-ventilated.

Application method: Brushing, rolling, or spraying.

Dilution ratio: Dilute with clean water. It is recommended that the dilution ratio should not exceed 20% (weight ratio).

Theoretical paint consumption: 12-14m2/L/round (paint film is calculated as 30μm, and actual consumption varies slightly with substrate roughness and porosity).

Recoating time: Surface drying 30-60 minutes, and recoating interval between the product and topcoat 2-3 hours (which may be duly extended under low-temperature and high-humidity conditions).

Maintenance time: 7 days / 25℃, which may be duly extended under low-temperature, high-humidity conditions to obtain a solid film effect. In the process of paint film maintenance and daily use, it is suggested that doors and windows should be closed for dehumidification in high humidity weather (such as Wet Spring and Plum Rain).

Substrate Treatment:

1. New wall: Thoroughly remove surface dust, oil stains and loose plaster, etc., and repair any holes to ensure that the wall surface is clean, dry and smooth.

2. Re-painting wall: Thoroughly remove the original paint film and putty layer, clean surface dust, and level, polish, clean and thoroughly dry the surface, so as to avoid problems left over from the old wall (odor, mildew, etc.) affecting the application effect.

*Before coating, the substrate should be checked; coating can only start after the substrate passes acceptance inspection.

Coating System:

Substrate treatment (3TREES substrate treatment product series) - primer (Odorless Mould-Proof & Alkali-Resistant Sealing Primer) - apply 1 round - topcoat (3TREES Odorless Wall Paint) – apply 2 rounds

Tool cleaning: After or between applications, please clean the tools with clean water in time so as to prolong tool life. The packaging bucket can be recycled after cleaning, and packaging waste may be recycled for reuse. 

1. This product should be sealed and stored at 0-40℃ in a cool and dry place and away from exposure to the sun.

2. Refer to the product label for production date, batch number and expiration date.