It is suitable for the sealing and reinforcement of brick walls, cement mortar plastering layers, renovation putty layers with low hardness, and concrete top layers with putty removed.

Strong Reinforcement 

High Permeability 

Odorless Formula 

Visible Color

Application Method:

The substrate surface should be clean, dry, flat and free from dust and oil stains;

Apply evenly with a roller or brush, and ensure complete painting to avoid missing coating;

The next application procedure can only proceed after the reinforcement agent is fully dry.

Dilution Ratio:

Clean water may be used to dilute, and the dilution ratio should not exceed 50% (the ratio should be determined based on wall and weather conditions)

Coverage rate:

8-10m2/kg (one round), actual consumption varies with substrate condition and dilution ratio.

1. Do not apply emulsion paint directly on this product;

2. Remove the old paint film before using this product;

3. Do not add cement into this product for the purpose of roughening. If roughening is needed, please use the 3TREES Two-Component Interface Agent;

4. Please do not apply in wet or cold weather (temperature < 5℃, relative humidity > 80%).