It is suitable for the sealing and reinforcement of brick walls, cement mortar plastering layers, secondary repair putty layers with low hardness, and concrete top layers with putty removed.

In-depth reinforcement

High permeability

Strong sealing

Odorless formula

Ready to use

Visible color

Application Method:

The substrate surface should be clean, dry, flat and free from dust and oil stains;

For better effect, immediately use the product after opening. If it needs to be diluted with water, the maximum dilution ratio should not exceed 10%;

Apply evenly with a roller or brush, and ensure complete painting to avoid missing coating;

The next application procedure can only proceed after the reinforcement agent is fully dry.

Coverage rate:

8-10m2/kg (one round), and actual consumption varies with substrate condition and dilution ratio.

1. Do not apply emulsion paint directly on this product;

2. Remove the old paint film before using this product;

3. Do not add cement into this product for the purpose of roughening. If roughening is needed, please use the 3TREES Two-Component Interface Agent;

4. Please do not apply in wet or cold weather (temperature < 5℃, relative humidity > 80%).