0.75L, 3L, 15L

It can be used in areas such as home decoration, automobile interior and advertisement, and applied to wooden materials including plywood, aluminum composite panel, HPL, density board, ash board and flax-based board. It can also be used on some metal decorative materials based on iron and aluminium, as well as on other materials such as rubber, plastic, leather, cardboard boxes and fibers.

Low VOC, quick curing, highly adhesive, easy to apply

1. Rid the surface of oil, stain, etc., and then texture and dry it.

2. Apply the glue to the surface, inside out, with a scraper or brush (for larger surface gluing, application on both surfaces is suggested) and leave it for 5-15 minutes (until the glue is not so sticky to hand).

3. Align the surfaces, squeeze out the bubbles from inside out, consolidate with a rubber or wooden hammer, and usable strength can be obtained in 24 hours.

GB18583-2008 Indoor Decorating and Refurbishing Materials - Limit of Harmful Substances of Adhesives

The product can be stored for 18 months in a cool, dry and ventilated place, in a temperature of 5-30℃.

1. Treatment of the back side of the object to be glued with hydrogen peroxide or thinner must be done before application of glue.
   

2. Cover the lid when opening to prevent glue from swelling out due to heat.

3. The product shall not be used under direct sunshine or in a temperature of over 60℃.

4. Keep away from children; not edible.

5. It shall be stored in a cool, ventilated place, away from fire and sun.

6. Not applicable to materials such as polyethylene, polypropylene, polytetrafluoroethylene, organic silicone, white cast iron, plastics with high plasticizer, rubber, PVC and leather.

   
   

Any 3TREES product shall be used strictly according to the instructions. For new or unrecognizable materials, or under special environments, a trial shall be carried out, or under the instruction of 3TREES technicians.