The 3TREES Odorless 360 Moistureproof Wall Paint is a multifunctional interior wall paint with the anti-moist effect. It is anti-moist, water-resistant and breathable, and can keep the wall clean and beautiful and reduce the harm of molds. The product has also passed UL GREENGUARD Gold Certification, French Indoor Air Emissions A+ Certification and China Green Product Certification and meets the more stringent Health+ Water-Based Coating Standard, thus providing better home protection.

Product use: It is widely used in the interior wall decoration and protection of villas, hotels, hospitals, schools, office buildings and homes.

Main ingredients: Water, pigment, filler, emulsion and auxiliaries.

Super Healthy, Super Caring

3TREES Health+ Water-Based Coating Standard

China Green Product Certification

UL GREENGUARD Gold Certification

French Indoor Air Emissions A+ Certification

China Environmental Labelling Product Certification

Highly efficient, odorless

Free form 7 additives

Outstanding Features, Superior Performance

Highly anti-moist, water-resistant and breathable

One-Package Solution to Wall Problems

Strong scrub resistance

Excellent hiding power

Strong resistance to alkali

Can be made into light colors

Doubled anti-mold effect

Easier application

Endurable brightness

1. China Green Product Certification: Certified according to GB/T 35602 Green Product Assessment - Coating Material.
   

2. Free from 7 additives: No added VOC, formaldehyde, benzene substances (benzene, toluene, xylene, and ethylbenzene), excessive heavy metal pigments and fillers, APEO, ethylene glycol ether and ether ester, as well as PAEs. For details, refer to the China Environmental Labelling Product Certification Requirements.

3. The Odorless 360 Moistureproof Wall Paint is undergoing packaging upgrading. Existing products with the old packaging will continue to be sold. Products in new and old packaging are of the same quality and quantity. Please feel free to use them.

Application instructions: The surface must be clean, dry, neutral, flat, and free of floating ash, oil stains and foreign substances. Water-leaking positions must undergo waterproof treatment. Before coating, the surface should be polished and leveled to ensure that the surface humidity of the pre-coated substrate is <10% and the pH value is <10. Paint surface effect will depend on substrate flatness.

Application conditions: Wall temperature ≥ 5 ℃, humidity ≤ 85%, well-ventilated.

Application method: Brushing, rolling, or spraying.

Dilution ratio: Use an appropriate amount of water to dilute (until reaching the appropriate application viscosity).

Theoretical paint consumption: 12-14m2/L/round (paint film is calculated as 30μm, and actual consumption varies slightly with substrate roughness and porosity).

Recoating time: Surface drying 30-60 minutes, hard drying 2 hours, and recoating interval 2-3 hours (which may be duly extended under low-temperature and high-humidity conditions).

Maintenance time: 7 days / 25℃, which may be duly extended under low-temperature, high-humidity conditions to obtain a solid film effect. In the process of paint film maintenance and daily use, it is suggested that doors and windows should be closed for dehumidification in high humidity weather (such as Wet Spring and Plum Rain).

Substrate Treatment:

1. New wall: Thoroughly remove surface dust, oil stains, loose plaster, etc., and repair any holes to ensure that the wall surface is clean, dry and smooth.

2. Re-painting wall: Thoroughly remove the original paint film and putty layer, clean surface dust, and level, polish, clean and thoroughly dry the surface, so as to avoid problems left over from the old wall (odor, mildew, etc.) affecting the application effect.

*Before coating, the substrate should be checked; coating can only start after the substrate passes acceptance inspection.

Coating System:

For best effect, please use this product together with 3TREES primer.

Substrate treatment (3TREES substrate treatment product series) - primer (360 Multi-Effect Mouldproof Allround Primer) - apply 1 round - topcoat (Odorless 360 Moistureproof Wall Paint) – apply 2 rounds

Tool cleaning: After or between applications, please clean the tools with clean water in time in order to prolong tool life. The packaging bucket can be recycled after cleaning, and packaging waste may be recycled for reuse.

1. This product should be sealed and stored at 0-40℃ in a cool and dry place and away from exposure to the sun.

2. Refer to the product label for production date, batch number and expiration date.

3. For more information, please refer to the product safety label.